Wide Gap Welded Plate Heat Exchanger for Alumina refinery

Short Description:

ASMECEbv

Certificates:                 ASME,  NB, CE, BV, SGS etc.

Design pressure:        Vacuum  3.5MPa

Plate thickness:          1.0  2.5mm

Design Temp.:            ≤350

Channel gap:              8  30mm

Max. surface area:    2000m2


Product Detail

Product Tags

How it works?

The plate heat exchanger can be especially used for thermal treatment such as heat-up and cool-down of viscous medium or medium contains coarse particles and fiber suspensions in sugar, papermaking, metallurgy, ethanol and chemical industries. 

Platular-Heat-Exchanger-for-Alumina-refinery-1

 

Special design of the heat exchange plate ensures better heat transfer efficiency and pressure loss than other kinds of heat exchange equipment in the same condition. Smooth flow of the fluid in the wide gap channel is also ensured. It realizes the aim of no“ dead area” and no deposition or blockage of the coarse particles or suspensions.

The channel at one side is formed between flat plate and flat plate that welded together with stud. The channel at the other side is formed between flat plates with wide gap, and no contact point. Both channels are suitable for high viscous medium or medium containing coarse particles and fiber. 

platular plate channel

Application

Alumina, mainly sand alumina, is raw material for alumina electrolysis. The production process of alumina can be classified as Bayer-sintering combination. The application of plate heat exchanger in alumina industry successfully reduces erosion and blockage, which in turn increased heat exchanger efficiency as well as production efficiency.

Plate heat exchangers are applied as PGL cooling, agglomeration cooling and interstage cooling.
Platular Heat Exchanger for Alumina refinery (1)

The heat exchanger is applied in the middle temperature drop workshop section in the decomposition and grading work order in the production process of alumina, which is installed on the top or bottom of decomposition tank and used for reducing the temperature of aluminum hydroxide slurry in the decomposition process.

Platular Heat Exchanger for Alumina refinery (1)

Interstage cooler in Alumina refinery


  • Previous:
  • Next:

  • Write your message here and send it to us